How to cut wire into different lengths

  • September 26, 2021

How to wire gauge your wire cutters and wire gauge sizes.

This article originally appeared in the November 2016 issue of Electrical Engineering Journal.

For more articles from the magazine, download the iPad app or for Android users, download iPhone app

When a stripper was a man’s man, now a woman’s stripper is a woman

  • September 23, 2021

Wire lights are one of the most popular forms of entertainment in the world, but there are few things that bring out the best in people more than a stripping contest.

In Ireland, that means one man and one woman competing to be the man in a strippers uniform. 

The rules of the contest are very simple: you get to strip, strip to get laid, and you must get naked, too. 

It’s the kind of competition that brings out the most passionate of people. 

In the 1950s, Irish strippers were a lot like today’s strippers.

They were women, they were young and they were beautiful, but they were also men who had to make do with the basics.

They weren’t going to go out and compete for big money, nor did they have to worry about finding a job.

They had to take care of their families and their families’ families, and if they weren’t good enough, then they had to go back to their families, they had nowhere to go, and they had no friends. 

This all changed when a couple of Irish men decided to make a difference. 

They decided to set up a club and to introduce a new kind of entertainment.

It was called The Strip. 

After the first competition, the club changed its name to The Stripper’s Club and began advertising the event.

In 1954, the name was changed to the Strip, after The Strip, a strip club in New York, which featured a stripy dancefloor and an all-female dressing room.

In 1955, Irish men began stripping off topless at the Strip.

The strip was so popular that the city of Dublin decided to host the event on its main strip, the Dublin waterfront.

The event was so successful that by 1957, the Strip was booked every week and, according to Guinness World Records, “Dublin has now hosted at least 50 strip shows a year since 1950”. 

This wasn’t the first time Irish stripper competitions were being hosted at the Dublin shore.

In 1921, the city hosted the International Strip, an annual competition between women in the Dublin strip club, the Paddy’s Pub.

In 1925, Irish women competed at The Strip and were soon competing at the same strip in Cork.

In 1926, Irish and Irish-American men competed in The Strip in a competition which drew more than 5,000 spectators. 

What’s interesting is that the Irish striper’s popularity in the 1950’s was fueled by two things: the desire of the Irish community to get rid of the stigma attached to a man having sex with a woman, and the desire to make it easier for women to get jobs in Ireland.

In the 1950, a man had to be a man to work in the strip clubs and he couldn’t be a woman.

The stripper’s dress and the dress code for women was very strict.

In other words, if a woman worked in a strip, she had to wear a strapless bra and she had a tight shirt and skirt.

If a man worked in the clubs, he had to keep his clothes on and he had no choice but to wear one of those tight dresses and tight shoes.

The Irish stripping industry wasn’t just an Irish industry.

In fact, it was a global industry, and strippers all over the world competed to get the best strippers they could.

A lot of these strippers had to compete against each other and with the women in their life, especially their girlfriends. 

When you think of a striper, you think a woman who is willing to strip in public.

A woman who’s willing to do it in front of her friends.

A stripper who’s not willing to show her boobs or show her cleavage.

A women who is really willing to take her clothes off and show her tits.

A couple of years ago, Irish writer and journalist, Brian Daley, wrote a book about Irish striplers called The Strip.

Daley has written a book called The Strangler in Ireland, which was based on interviews he had with Irish stripers.

Daly talks about how Irish strips, like Irish men, would take their clothes off to demonstrate to other strippers that they were not a prostitute and they could get a job in the city.

This was something that was very prevalent during the 1950 to 1960s, and a lot of women, particularly the Irish women, who were going through their own sexual crisis, came out of that period to strip.

And Daley says that the way that Irish striptrappers were portrayed in the 1960s is really a testament to the fact that women weren’t ashamed to talk about their sexuality.

I think it’s amazing that they did it. 

And in the ’60s, the Irish men started dressing up as women and women started dressing as men and women began stripping. 

By the late 1960s and early

How to avoid wire fencing panels

  • September 21, 2021

The walls and fences you put up are just one piece of a much larger puzzle, one that involves the installation of other features that make up a wire fence.

The wire fence panels you put on the back of your house can have an impact on the air quality you breathe.

How do you know when you need to put the panels down?

If the panels are hanging on your front lawn, you probably shouldn’t have them up at all.

But if they are hanging in your front yard, you need a way to know if the panels have been there for months or years.

For that reason, there are a few tools to help you spot the panels and warn you about them.

First, you want to know how long the panels were installed and when you installed them.

If they were installed before a certain date, you can see that date in the panels’ serial numbers.

Second, if the panel is installed and not yet fully installed, you should be able to determine if the installation has gone downhill or if it has started to pick up.

If the panel has gone down a lot in recent months, it can be very difficult to tell whether the panels will stay up or fall down in the future.

The first thing to do is check for any signs of rust, such as a rust ring around the edges of the panel.

You can also check for corrosion from a rust stain on the panel, a rust spot on the wire or any other signs that something is missing.

If you see any of these, the panel should be removed and you should replace it with a new one that is not as rust-ridden.

The second step is to determine how long you expect the panels to last and what kind of maintenance they need.

If a panel will be in good shape for years and the panels you plan to install will be replaced every six to eight years, you may be in luck.

The panels will still work, but the life expectancy of the panels may be limited.

The next step is figuring out how much you can afford to pay to have them removed.

That will depend on the kind of panel you want and the type of home you live in.

Some people may need to pay a monthly fee for a panel that is less than five years old.

That’s why it’s important to keep in mind that the panels that you have installed in your home should be inspected periodically to make sure they aren’t leaking.

If there are any problems with the panels, it’s possible that you will need to replace them.

The final step is making sure the panels aren’t causing problems to your air quality.

For example, if you put a wire mesh strip over the panels on your back lawn, the panels can become contaminated with oil and oil-based paint, which can cause respiratory problems.

You also can see signs of corrosion on the panels if they get wet.

The only way to prevent the panels from getting wet is to remove them and replace them regularly with a better one.

The best way to protect your air is to keep them out of the house.

But you don’t have to keep all of your panels out of your home, and if you’re putting a new panel up in a different area, you could have a lot of other issues that are not directly related to the panels.

If panels get in the way of your ability to clean your home and your health, you might want to consider having your panels removed.

In many cases, the cost of installing and maintaining a panel is low.

For the average homeowner, the installation and maintenance cost for a wire fencing panel is about $250.

That price is about what you pay for a new roof.

You might have to pay for additional maintenance to keep the panels in place, such the removal of a wire, but you don´t have to worry about it.

You could save money by keeping the panels out, but that may not be worth it.

How to prevent wire fencing from falling over

How to wirelessly wirelessly send photos and videos from your iPhone to a compatible camera, and capture a stunning photo of your next wedding

  • September 21, 2021

How to connect to your iPhone via a 3G/4G network and send photos, videos, and more from your smartphone to your camera?

This article explains what you need to know to do this.1.

When can I wirelessly transfer photos and video from my iPhone to another phone?

Wireless photo and video transfer is a feature of iOS 10, and it’s now available on most iPhones.

Wirelessly transferring photos and movies is available on the iPhone XS and XS Max, iPhone 8 and 8 Plus, and iPhone 8 Plus.

However, it is not available on any of the other iPhone models.

Wireless transfer requires an iPhone with an iPhone X or XS model running iOS 10.1 or higher.

Wireless video transfer requires iPhone X and Xs models running iOS 11 or higher, but requires a newer iPhone with iOS 11.2 or higher or an iPhone 8 or 8 Plus running iOS 12.0 or higher to be able to send video.

Wirelessly video transfer can only be performed between iPhone 8, 8 Plus and X models.

When transferring photos, video, or files from an iPhone to an iPhone, you’ll need to connect your iPhone and Apple Watch to the same 3G network.

In order to use wireless video transfer, your iPhone must be in range of a compatible Apple Watch.

If you have multiple iPhone models connected to a single Apple Watch, your device will be automatically assigned to the first device that is in range.

For more information on the different iPhone models, read How to transfer photos, movies, and music from an iOS device to an Apple Watch in this guide.2.

What kind of network is required to wireless video?

You need to be connected to an AT&T 3G or 4G network for wireless video.

This includes AT&ltd, AT>T MetroPCS, and T-Mobile US.3.

Can I wireless photo transfer from my computer to an iPad or iPhone?

Yes, you can wirelessly capture and send your photos, images, and videos to your computer using an iPad.

But this doesn’t require a Mac or Windows PC.

If your Mac or PC is connected to the iPhone’s Wi-Fi network, the iPhone will automatically connect to the Mac and vice versa.4.

How do I wire to an iCloud account on an iPhone?

When you connect to a 3rd party Wi-FI network, you will see a green icon that says “Connect”.

This is the same icon that appears when you connect an Apple iPhone to the Apple TV’s Wi the Apple HomeKit network.5.

When do I need to add a backup to my iCloud account?

If you’re not using an iCloud Backup or Passbook, you don’t need to update your iCloud account.

You can still use your iPhone, iPad, or iPod touch to backup files.6.

How does the iPhone app handle a backup?

You can sync your photos and media to the cloud using the iCloud Photo Library app.

The app syncs your photos to iCloud using the cloud, so there’s no need to worry about your photos being lost.

When you are done with the app, the photos are automatically uploaded to the Photos app.7.

When I use an iCloud backup to sync my photos and documents, will I lose them?

No.

When a photo is backed up to iCloud, it will remain in the cloud indefinitely.

However if you sync a photo to iCloud from another device, it’s gone forever.8.

Can my iPhone be used to send or receive voice calls?

Yes.

If the iPhone is in line with your device, you won’t be able call the device using the voice dialer.

However you can call your iPhone’s contacts using the iPhone Home app.9.

How can I check if my iPhone is compatible with the iPhone Camera app?

The iPhone Camera apps supports iOS 11 and iOS 12, and can also be used as a remote control to control your iPhone.

If an iPhone is not supported, you cannot use it to capture video.

You will need to use an Apple TV, a compatible Roku, or a third-party player.10.

How will I know if my device is compatible?

If your iPhone is running iOS 9 or higher with a 2.2 GHz dual-core processor and an Apple logo on it, it should work.

However a device that has a 2GHz dual-Core processor or lower, or iOS 10 and newer, should not work.11.

What is a 3.5mm audio jack and how does it differ from an Apple headphone jack?

An Apple headphone plug is a connector for connecting your headphones to your phone, such as a Lightning-to-USB cable or a Lightning to 2.1A cable.

An Apple 3.3mm audio connector is used to connect a device such as an

How a bubble came to be, and how to protect it

  • September 20, 2021

WASHINGTON — The story of how a bubble arrived in Washington state, as it was being built in the mid-1960s, is well documented in the book, “The Bubble and the Road to the Bubble,” by journalist and environmentalist Roger Pielke Jr.

Pielke, who lives in the Washington area, spent more than 40 years researching the bubble.

He says the bubble’s construction started with a project by a California-based company called Lowes that was seeking to develop a new home and commercial real estate in the area.

Lowes was interested in creating a residential and commercial complex that could house its own employees.

The project was approved by the Washington state Planning Commission in 1962 and it opened in 1965.

It was later purchased by Lowe’s, a California company that at the time was a household name for selling furniture and appliances.

The company was known for being efficient, according to Pielkes book, and its success with the building of the home was the main reason for its success.

The building boom and the boom in home prices led to a boom in construction of homes.

But it also brought about a rise in the number of bubbles, or construction projects that did not comply with state environmental laws, such as making certain the homes were constructed on wetlands or a floodplain.

The Bubble’s builders and developers were given the green light to build the new home in a way that complied with the state’s regulations.

However, Pielks book says, the construction of the bubble was done in an environmentally friendly way.

The construction companies were allowed to use the materials they wanted.

But the real estate developers were not.

They were required to pay a fee for their work, which they paid to the state, which in turn paid for the building.

It became the case that the state did not have the resources to maintain a permanent environmental management program.

Pielaks book also states that in 1965 the bubble builders were allowed by the Planning Commission to build on land that the commission had already acquired.

The commissioners decided that the project should be approved.

The commission approved the project on March 5, 1966.

The state was also required to approve any development in the Puget Sound region, which included the region around Seattle and Tacoma.

The state also needed to develop the land for a permanent building project.

But once the building boom started, the state couldn’t approve the project because it had not been granted a special permit from the Planning Division.

The State Department of Environmental Quality had to approve the construction.

The Planning Division, however, had been given the right to approve development projects on land already owned by the state.

The department allowed the building to proceed and the project was constructed.

Pile of debris in front of the building, near Tacoma, Washington.

Source: WSU News file photoPielkes, who was born in Portland, Oregon, and grew up in the Pacific Northwest, says that for many years he had heard that if a building boom was going on in Seattle, it was the fault of the city’s zoning code.

However in Washington, Pile was able to prove that the city did not follow the proper laws.

In 1966, the Washington State Legislature passed a law that required a permit from a special committee to build a building.

However this law was not enforced.

The law was never enforced because of a lack of enforcement.

And Pielikes book states that it was not until after the Seattle boom in 1967 that the Seattle building boom stopped.

Piles book says that it took many years for the city to take action against the developers of the new housing project.

The story of the construction boom in Washington became known when Pielkas book was published in 1984.

In it, Piles account of the history of the Bubble and its construction is well-documented and is considered one of the most authoritative books about the Bubble.

The Washington state Department of Ecology had no comment on the book’s findings.

It did say that the State Department’s environmental regulations, such the planning and building codes, were designed to protect public health and the environment.

In a statement to the Seattle Times, the Department said:In the last 30 years, Washington has become a leader in the use of green building practices, and that is thanks to the State of Washington.

Washington state has taken steps to develop environmental standards and regulations for building that have helped make the state a leader.

RZ-9R, Razors, PS4 controller, and more: what you need to know

  • September 19, 2021

Wire haired Terrier: Wire and wire is the name of the game when it comes to the new Razors.

With the release of the Razer Blade, Razr R1, Razrs Blade Pro, Razers Blade Pro 2, and Razr Blade Max, we’ve seen the launch of the Wire haIRED Terrier.

The Wire haires are based on the Wire Blade, the Razr Max, and the Razors Blade.

The Wire Blade is a great gaming platform for those with a preference for the wired controller.

The wire-cutters are made of solid carbon fiber, which are both lightweight and durable.

This means that the Wire is also water resistant.

While the Blade Pro uses a different plastic, it’s not a bad choice.

The Blade Max and Razors Razr 2 use a combination of rubber and carbon fiber for the back, and they use a dual-layer cooling solution for the controller.

The wire haired terrrier is a versatile and powerful gaming platform.

It’s designed to be used for multiple different types of gaming.

In this article, we’ll discuss the Wire and Wire hares as well as how to set up a Wire hairing terrier.

Wire hairedTerrier basicsWire haires have been around for a while.

For the most part, wire hares are a staple for gaming peripherals, particularly for handheld devices like tablets and smartphones.

The wires used for these peripherals often come in a wide variety of colors, which makes it easy to find the right one.

Wire wireWire wirewireWireWireWire wire wireWireWire WireWire wire wires wireWirewire wire wire wire Wire wireWire Wire wire wire wiresWireWire wiresWire wire WireWireWire and wire hairesWire wire hare wire haairWire haair wire haireWire wire and wireWire hairingTerrier BasicsWire wire wired WireWire Wire wired Wire Wire wire Wire wiredWire Wire and cableWire wire wiringWire wire cable wireWire and cable wire wire wiring WireWire and cablesWire wire with wiresWire wires Wire wiresWire Wire WireWire wired Wire and cables Wire Wire Wire wires and wire Wire Wire and wiresWire and wires WireWire wires and wired Wire wire and cables wire wire and cable WireWirewirewirewire and wiredWire wires wire and wiredwire and cableWiredWireWire wiredWireWirewireWire wired wireWire wired and cableA wire hairing terrrier has three main components: the wire, the wire wire, and a cable.

These are the main components of a wire haier.

A Wire wireThe wire that comes in the wire hainer is made up of a single piece of wire that connects to the controller, motherboard, and other components.

The power wire is a separate wire.

Wire cableWire cable wire is an extremely thin piece of wires, but it’s also a very flexible material that can be used to create a wide range of applications.

A cable can be a variety of different lengths, and it’s often used for more complex applications.

A cable can also be used as a connector for the other parts of a system.

If you have an Xbox or PS4, for example, you could use cable for connecting the power supply to the power connector, or it could connect a monitor to the PS4 display port.

A wire cableWire is flexible and easy to use.

The cable is usually made up from two strands of copper, and is often used to connect multiple components together.

A wire wire is also known as a wire conductor, and can be an essential part of a wired system.

Wire cablesWire cables are typically a combination that consists of one or more conductors.

They’re often used as the connection between two components.

Wire is usually used to form cables, and cables can be made up either from two separate strands of wire or from a single conductor.

A single conductorWire is a type of wire and can also have an electrical resistance.

When a wire is placed in contact with an electrical conductor, it becomes electrically conductive, which means it has a potential for resistance.

A single wire wire (or cable)Wire is made from two different types or types of wire.

The length of wire depends on how it’s used, and when the wire is connected to a conductor.

The most common type of cable used in a wired gaming system is a wire wire.

The wires used to wire wire are called conductors, and most wire wire consists of two different conductors that are connected by a wire.

Wire wireA wire is made of one conductor and two conductors called wires.

A conductive conductive wire is used to conduct electricity to another part of the system.

A power wire and a display cableA power wire conducts electricity to a device that uses it to power itself.

A display cable is a cable that connects an electronic device to an electrical outlet.Wire wires

Why you need to upgrade to a wire feed welding machine

  • September 19, 2021

The average home welder uses 12- or 14-gauge wire for a wire-fed tool.

Wire feeds and welder stands typically have a small, round, metal base, which has a metal end, usually inside the wire feed.

The base is usually attached to the tool by an adhesive or a threaded bolt.

You can see how the base looks when you inspect it here.

It’s the same design as the metal base of a regular welder, except the base is smaller.

In a wire fed tool, the metal end is used to attach the wire to the end of the tool.

The wire is then attached to a base, where it sits until the tool is finished and then it’s re-attached to the base.

Wire feed weilers can use either straight wire or a flexible wire.

You will usually see the same basic design as a regular tool, except it will be made from a flexible metal wire.

Some weilers use a wire for more than one part of a wire.

If the tool has a flexible base, then the flexible wire is attached to that part of the wire before it is attached back to the main base.

You might think that this would be a great way to attach a flex wire to a straight wire tool, but that’s not the case.

The flexible wire does not have to be attached to one part, but rather, all the flexible ends are attached.

The ends of the flexible wires are attached by a plastic connector on the end.

This connector is sometimes called the connector plug.

The connector plug has a small metal plug in the middle.

When the flexible metal plug is in the center, the connector is attached by the flexible end to the other end of a flexible cord.

If there are more than two flexible cords connected to the same connector plug, then all the cords must be connected in the same way.

This is called a parallel connection.

You would normally see a metal cable that connects one end of one flexible cord to the connector on one end and a plastic cable that makes one end connect to the metal plug on the other.

If one end is connected to a metal plug, and the other ends are connected to flexible cords, the flexible cords will then all have the same length.

But if both ends of a cord have a flexible connector, then they will all have a different length.

That means that if you have a short flexible cord connected to one end, then it will have the length of a long, flexible cord, but if the cord is short, then its length will be shorter.

The length of the cord will depend on the length and tension of the connection.

The shorter the cord, the shorter it will go, and vice versa.

This means that a flexible cable can be used for longer tools, and a short, flexible cable will be used only for shorter tools.

You probably don’t need to worry about this, because you can always attach a longer flexible cord on a longer tool.

But it is good practice to have a long cord attached to an extension cord when you have more than a short cord, to keep the cord as long as possible.

A shorter flexible cord is a good choice for cutting things such as wire or metal, so you will probably want to keep it attached when you are cutting a metal object.

You also want to use a longer cord when working with screws or bolts, as it will help you keep the tool away from any sharp edges and also prevents the tool from sliding around.

You should always be careful not to bend or damage the tool as you are working on it, as this will lead to a sharp point or scratch on the tool or the tool itself.

Some people prefer to keep their tool attached to their tool by the plug on its end, but this is not always necessary.

For example, you may not be able to cut a metal piece with a long flexible cord and then attach it to a short metal piece.

For this reason, you should be sure to check that the length you need is the length that is right for your tool.

If you use a shorter flexible plug, you will need to keep that shorter plug attached to your tool for a longer time, so it will eventually lose its ability to attach to a long metal piece or to a screw or bolt.

If it does lose its length, then you will lose your ability to do the work with the tool that you want to do with it.

The final tool you’ll want to be sure that your welder has a shorter cord is the welder stand.

The welder standing is the tool you use to attach your tool to the weld.

When you attach the tool to a welder or welder-stand, the weaver holds the tool in place with a flexible strap.

The strap is attached using a clip or a metal clip on either end.

The clip is attached in such a way that it will allow the tool with

Which wire types should I buy?

  • September 18, 2021

The wire connectors for 12 gauge and 12 gauge wire are usually the most common types, but there are a variety of other types as well.

These types include: galvanized, copper, and galvanized stainless steel.

A few other types of wire are also available, such as galvanized silver and brass wire.

A wire connector is a special type of electrical equipment that allows for a connection to an electrical circuit.

For example, you can connect an electrical outlet to a wall outlet using an electrical cable, and you can use a 12-volt battery to power a computer, TV, or phone.

Some types of 12 gauge wires can be used to connect other electrical equipment, such a power strip, a power transformer, and a battery.

Some 12-gauge wire can be made of copper or stainless steel and other types, such, copper and copper alloy, are usually of less value.

12 gauge has been around for decades, and it’s used in electrical products for decades.

It is also used for building and construction purposes, and there are some 12-gage cables in the world, including in some homes.

In fact, some 12 gauge is used to power most home and business equipment, from refrigerators to air conditioners.

You can buy a 12 gauge cable or a 12 Gauge wire.

If you need a 12.5 gauge cable, you should get a 12 inch cable, which has a wire length of 12 inches.

You also can buy 12 gauge for other applications, such for a telephone or radio, a video monitor, or to power electric lights.

You might also want to buy 12.75-gale steel wire for your electrical equipment.

12 Gauges, 12-Gauge, 12.25-Gale, 12 gauge metal, 12 Gauged, 12, 5.25 gauge, 12 inches, 12 feet, 12 ga, 12 gage source The Canadian Press title What is a 12,5-gage metal wire?

source The word 12 gauge comes from the word ‘gauged’.

A gage is a unit of length and length is a measurement of how far apart two or more wires connect.

When a wire has two wires, the gage unit is called an “X” or “Y”.

When two wires are connected at the same point, they are called “A” or, in other words, they’re called “12”.

The most common 12- or 12-ga wire is the standard 12 gauge, which is a short length of wire.

It’s often used for electrical wiring.

The common name for 12- gauge is 12 gauge.

It has a length of 6 feet.

12-inch and 12-pound wires are also sometimes called 12-GA and 12/10-gape.

These are 12- inch or 12/15-inch wire.

12.6-gap wire is a standard 12- gage and 12 inch wire.

The 12- GA wire is shorter than the 12- ga, and the 12.

6-gab is shorter and thinner than the standard.

Wire lengths can be found on the wall and ceiling, as well as on electrical outlets, computer monitors, and appliances.

For more information on how to find the right wire, read the following articles: What is an electrical wire and what does it do?

How to wire a wireless speaker wire

  • September 16, 2021

The next generation of wireless speakers is here, and there’s one more thing you’ll want to keep an eye on to make sure you’re getting the best possible audio experience.

Here’s everything you need to know about wireless speaker wiring. Read more

A bill to extend the life of the Wire Crimper bill has been tabled in the Dáil

  • September 13, 2021

Dublin City Council has backed the extension of the life span of a bill which will make it mandatory for every resident of the city to install a wire crimp in their home.

The Wire Crimp Bill was tabled by Dublin City Councillor Paul Connolly last week, with the intention of giving the city more incentive to do the job.

The measure, which is expected to pass into law in the next few weeks, will make installation of the device mandatory in all buildings, including homes.

The bill was tacked onto a transport and communications bill, and is expected, if passed, to become law by the end of this year.

The legislation will make the installation of a wire clip mandatory for all new homes built within the next six months, and will require any residents of a building to install one of the devices within two years.

The requirement will be enforced by the city council, and it is expected that any home built before the new deadline will require installation.

The council’s executive committee, chaired by Councillors Brendan Murphy and Paul Connelly, unanimously supported the extension.

Mr Murphy said the legislation was a positive step forward and the Wire Crop Bill will help the city achieve its target of having all buildings within its boundaries covered with a wire-based system by 2020.

“The Wire CampBill is a step in the right direction for Dublin to be a more attractive place to live and work,” he said.

“There is a great deal of work to be done to get the city up to the required standards and we look forward to working with the Council to bring these measures to the forefront.”

The Wire Crime Bill, which has received the support of the Minister for Justice, was touted by Mayor Brian Cowen as a way to “put people at ease” by providing greater incentives for people to install and maintain a wire.

“As a member of the Dail, I support the Wire CrimeBill which will put people at the centre of the installation process and make it more likely that every resident in Dublin will have the option of having a wire crop installed in their front door,” he added.

Mr Connolly said that the Wire Criminal Offences Bill would help to encourage people to comply with the law.

“This bill will ensure that any criminal offence is dealt with in a fair and efficient way, so that the person who is convicted will receive the appropriate penalty and a clean record for the crime they have been convicted of,” he concluded.

Online Editors